Видео

Great video!!! Good job!!! I've recently bought the SparkFun OBD-II-UART and I'm trying to parse data from a k-line ISO 14230-4 , KWP2000 Fast init. My point is that I need to request data from the OBD at the maximum possible frequency. I'm developing a set of interruptions based on a microcontroller timer to do a good "timing" job. What is the maximum AT command per second the board can handle without overflowing? Thanks!

Is there a preplacement / upgrade for this available? The bord is quite old and on back-order for a while.

Thanks, helpful. Did not however appreciate the ending advice to stay safe and be kind.

This is 🔥🔥🔥 homie can actually spit with no auto tune

We had that same problem at the hq of a big company. For one week a year the gate would get stuck open, and by the time repair guys came to look at it it would be fine again. 3 years to realize it was the sun shining juussstttt right.

Like the I2C interface on the back.

I still don’t get what improvement has being made so far that stands it different. Please make this illustrations more concise, and practicality 😅😂

uh you can buy beer with crypto currency, you can buy anything with anything as long as someone is accepting it as payment

very nice demo, i am suprised that it can work underwater pretty much naked!

Wow this is more than timer interrupts, this is advanced Arduino registers timer interrupts. Not for beginners. Unfortunately, the video does not talk about timed tasks during an interruption.

Please turn your phone off when filming videos 🙏🙏

Picked up the SEN-14066 with the M6e a few months go to learn UHF RFID. Awesome board! Works great with .NET wrapper provided by Jadak. Can't wait to explore further with WRL-24738 and the M7e.

End of earth 😢

Great video! Thank you very much for being a part of the growing onocoy community <3

Compre sus radios, hago sus pasos y no se conectan, se que dan las luces verdes moviendo nomas,

se puede usar sin conectar ??? la mia se apaga cuando saco el cable

Good stuff but the price needs to come down.

Mind blowing circuit: 5v -- R - R - R - 0v Getting another voltage out: 5v - R - (3.3v) - R - R - 0v

Hi, you lib not working correctly, now i have 3 new chip, locked, with not working msg signing. I try avery thing but not luck to work. I wrote to you support maby 5-6 times, but you ignoring me. I Not recomend using you lib and hardware.

crazy stuff. im hoping this becomes more well known and turns into a major contender for the best odometry

WELL BACK IN MY DAY...

Wow, I didn't know you could do this with a arduino! What would be the point of using registers on code when it does the same thing as the normal code? Am I missing something here?

Nope. Adios.

are you frikkin kidding me? NO. Goodbye, Sparkfun.

what does crypto have to do with GPS?? just insentive to set up reference stations?

been a Sparkfun customer for over a decade, not sure how long this has been going on with you guys but its lost you a customer today

I'm new to trading, and I've lost a good sum trying out strategies I found in online tutorials. I would sincerely appreciate any recommendations you have.

This is the second time you upload it?? Can we do the same with the Torch RTK?

Why is the soil sensor mounted on the micromod carrier board, surely your not going to stick that in the dirt?

My 8 year old weather station just quit, so I'm building my own! At least I'll be able to readily replace components if something goes wrong.

Difficult seeing due to dark background

Hi! As a robot builder for the French Robotic Cup, and since we build holonomic robots, I ordered this sensor on day one I just received it and I'm experiencing some issues with the IMU. It constantly drifts, even after calibration. That’s sad because all the other features work like a charm. But this drifting on the angular position destroys the measurement accuracy. It's a shame because otherwise, it’s a great product. Perhaps a different calibration method or software corrections are needed?

I get 21,5 meter deviation in elevation when I initiate tilt. Looking closer at the data shown in the video it’s evident that it shows the same problem.

Trying to get started in robotics as a complete and utter noob for the first time and I got to say 0:59 is impressive as hell.

Hi Sparkfun, I'm getting in trouble trying to find how to wake up CO2 sensor STC31 when using your library " SparkFun_STC3x_Arduino_Library", can you tell me which function to use to wake it up after enter sleep mode

Omg thank you so much, you explain this topic so well, so far I have only found complicated explanations about TN LCDs, but your video is easy to understand and makes important points! Thank you.

Great teaching tools.

Very nice, thank you. Helped very much.

Is that watch water resistant to 50m, because I can imagine going swimming with it.

I have a couple of optical flow sensors and an IMU but packaging this on one board **and** doing the sensor fusion for me is well worth the price!

Very interesting. Is the NMEA output 0183 or 2000 ?

Great guy, great voice, great pacing. Cool practical example! Great to see the SWD pins broken out and Firmware available!

Oh my god this is awesome! I've been looking for an optical flow sensor from a mouse for exactly this purpose! You can't buy them though. I was never able to find the actual sensor for sale, it seems like they all go directly to mouse manufacturers. This is so good!

You had me with the Doxies, we have two, a red dilute smooth and a red long hair. We have had 9 Doxies over the years. We have never had a Dapple, they are so cute perhaps we will in the future.

Unuseful video because i was waiting for a deep explanation of how connect the device and a circuit diagram

Cumulative error 🤯

Am I the only one thinking that such a system would be a hudge upgrade for diy indoor drones, without gps fixes the IMU derivates really quickly. But now it would need to account for varying altitude, pitch and yaw. This system is already implemented into DJI's and parot's drones with bown facing cameras, and having an accessible platform would be really appreciated

Awesome! I also had the idea of using a mouse years ago (I'm an FTC mentor), so glad to see this become a reality.

looks like you could do a 'next-gen' version of this with STM's intelligent IMU, that can perform a LOT of navigation tasks on-board....like ISM330DHCX.

This is great; I really appreciate having an/the engineer speaking to the product and their experience and insights